Question 1

Does thermal imaging replace a standard building inspection?

Accepted Answer

No. Thermal imaging is a specialist diagnostic service used alongside a standard building inspection when further investigation is required. It supports the process by adding another layer of non-invasive information.

Question 2

When should a building inspector recommend thermal imaging?

Accepted Answer

Thermal imaging can be useful when suspected moisture, insulation irregularities or building envelope concerns cannot be confirmed visually during an inspection, or where additional independent diagnostic support is appropriate.

Question 3

Can thermal imaging confirm moisture inside walls?

Accepted Answer

Thermal imaging identifies temperature anomalies consistent with moisture patterns or concealed pathways. Interpretation depends on conditions and findings may indicate the need for further targeted investigation rather than a final standalone conclusion.

Question 4

Is the inspection invasive or damaging?

Accepted Answer

No. Thermal imaging is non-invasive and does not require cutting into walls, lifting carpets or removing linings.

Question 5

What areas are typically checked during an inspection?

Accepted Answer

Accessible internal walls, ceilings, around windows and joinery, and other relevant areas where hidden moisture or thermal anomalies may present.

Question 6

Will I receive a written report?

Accepted Answer

Yes — a clear written report is provided with supporting thermal images and notes explaining observed areas of concern.

Question 7

What conditions are needed for thermal imaging to be effective?

Accepted Answer

Thermal imaging is most effective when suitable environmental conditions are present, including temperature differentials and accessible surfaces. If conditions are not ideal, this will be discussed when booking.

Question 8

Can thermal imaging help support further investigation recommendations?

Accepted Answer

Yes. Thermal imaging can provide additional supporting information where inspectors wish to recommend further investigation of suspected moisture or building envelope issues.

Question 9

Who is this service suitable for?

Accepted Answer

This service is commonly used by building inspectors, property buyers, engineers, consultants and vendors when additional independent diagnostic clarity is required.

Question 10

What happens if an area of concern is found?

Accepted Answer

Findings are documented in the report and may be recommended for follow-up investigation by an appropriate licensed trade or specialist, depending on the issue identified and how it is presenting.

我们的服务

为建筑检查员提供热成像诊断支持